RAW machined OR DRESSED
With a fully operation timber mill at the ready, all timber slabs can be supplied to you as a rough sawn product for your own joinery project or worked into a magnificent dining table, bench top or polished sculpture from the specialized joinery team at our sister business,
Nullarbor Sustainable Timbers.
+ Milling Options: Raw & Machine Ready - Thicknessed - Resin Filled - Dressed - Fine Sanded - Custom Made Furniture
+ Sizes can range up to 5 metres long and 1.6 metres wide.
+ Over 3000 slabs in the stock yard.
+ Redgum and other timber slabs & burls sourced from Vic, southern NSW, northern Queensland (maple) and rare French oak from Europe.
+ Prices range from $350 - $7,000
If you invest in one piece of specialty timber in your lifetime make it a one piece timber slab.
There is no other stockpile on earth this rare, seasoned and magnificent.
Nullarbor Sustainable Timbers.
+ Milling Options: Raw & Machine Ready - Thicknessed - Resin Filled - Dressed - Fine Sanded - Custom Made Furniture
+ Sizes can range up to 5 metres long and 1.6 metres wide.
+ Over 3000 slabs in the stock yard.
+ Redgum and other timber slabs & burls sourced from Vic, southern NSW, northern Queensland (maple) and rare French oak from Europe.
+ Prices range from $350 - $7,000
If you invest in one piece of specialty timber in your lifetime make it a one piece timber slab.
There is no other stockpile on earth this rare, seasoned and magnificent.
STOCK YARD TOUR:
BARRY DONCHI INTERVIEW
|
|
|
THE PROCESS
In Photos.
OPTIONAL FINISHES
OPTIONAL TIMBER FINISHES
Timber finishes provide a final layer in influencing the way the timber looks.
Finishes for internal uses can be classified as clear polyurethanes, oils and stains.
River Redgum’s beautiful appearance commands attention, leaving little need for colour stains.
It's best left natural with a clear finish, hand rub or natural oiling.
Our sample kit has been finished with satin, polyurethane sealer and coated with french polish shellac.
River Redgum slabs are suitable for an array of finishes including oils, high gloss and satins.
Polyurethanes create a clear film over the timber in satin, semi gloss and gloss sheen levels. Lower levels of sheen (satin) help hide imperfections in the flatness of large areas such as floor boards. In contrast high gloss has the opposite effect due to increased reflectivity. Even so it allows easier cleaning and there is less likelihood of mould growth caused by the condensation of steam, fats and oils which occur in kitchens and wet areas. All gloss levels can be formulated to have anti-yellowing agents to prevent the dis- colouring brought about by long term exposure to ultraviolet light (Note: only light coloured timber species are noticeably affected). Clear finishes can also be formulated to provide various levels of impact resistance and therefore some are more applicable than others where high traffic usage is involved (e.g. floors).
Oils differ from clear finishes as they soak into the timber and therefore loose the features associated with a protective film.
They also tend to create a different appearance by looking more natural and creating a lustre.
Stains are similar to oils in the way they soak into the timber and provide a relatively flat, unsealed appearance. Perhaps the main difference is that stains have a colouring agent that aims to tint the natural timber to provide an altered appearance. It is also possible to use stains in conjunction with clear finishes where the latter is used to provide gloss and a protective film over the stain.
Timber finishes provide a final layer in influencing the way the timber looks.
Finishes for internal uses can be classified as clear polyurethanes, oils and stains.
River Redgum’s beautiful appearance commands attention, leaving little need for colour stains.
It's best left natural with a clear finish, hand rub or natural oiling.
Our sample kit has been finished with satin, polyurethane sealer and coated with french polish shellac.
River Redgum slabs are suitable for an array of finishes including oils, high gloss and satins.
Polyurethanes create a clear film over the timber in satin, semi gloss and gloss sheen levels. Lower levels of sheen (satin) help hide imperfections in the flatness of large areas such as floor boards. In contrast high gloss has the opposite effect due to increased reflectivity. Even so it allows easier cleaning and there is less likelihood of mould growth caused by the condensation of steam, fats and oils which occur in kitchens and wet areas. All gloss levels can be formulated to have anti-yellowing agents to prevent the dis- colouring brought about by long term exposure to ultraviolet light (Note: only light coloured timber species are noticeably affected). Clear finishes can also be formulated to provide various levels of impact resistance and therefore some are more applicable than others where high traffic usage is involved (e.g. floors).
Oils differ from clear finishes as they soak into the timber and therefore loose the features associated with a protective film.
They also tend to create a different appearance by looking more natural and creating a lustre.
Stains are similar to oils in the way they soak into the timber and provide a relatively flat, unsealed appearance. Perhaps the main difference is that stains have a colouring agent that aims to tint the natural timber to provide an altered appearance. It is also possible to use stains in conjunction with clear finishes where the latter is used to provide gloss and a protective film over the stain.
ON SITE INSPECTIONS
NOW available in MOAMA
|
We offer on-site inspections of our timber slabs during business hours at our Moama showroom.
Inspections of the stock yard and rural gallery by appointment.
MASS STOCK YARD IN REGIONAL VIC/NSW:
You can find our stockyard and offices at 92 Graham St, Moama on the Murray River's NSW/Victorian border.
Come for a day, stay for a weekend at our family accommodation Tree House Hideouts Echuca
Inspections of the stock yard and rural gallery by appointment.
MASS STOCK YARD IN REGIONAL VIC/NSW:
You can find our stockyard and offices at 92 Graham St, Moama on the Murray River's NSW/Victorian border.
Come for a day, stay for a weekend at our family accommodation Tree House Hideouts Echuca
SHIPPING OPTIONS
There is nowhere Ancient Timber Slabs by Nullarbor don't go.
Our nation-wide Australian shipping options and International Delivery Methods are efficient, cost-effective and
come with a guarantee of safe delivery.
Our recent relationship with NCIC Pty Ltd in Poland is a gateway to European markets.
We encourage you to contact us to discuss your needs.
Our nation-wide Australian shipping options and International Delivery Methods are efficient, cost-effective and
come with a guarantee of safe delivery.
Our recent relationship with NCIC Pty Ltd in Poland is a gateway to European markets.
We encourage you to contact us to discuss your needs.
|
